Jergens Ball Lock® Back Mount Receiver Bushings are used in through hole applications (Light Press Fit).
Specifications:
- Material: 4340 Steel
- Finish: Black Oxide
- Heat Treat: 50-54 RC
- Operating Temperature Range: -20°F to 400°F (-30°C to 200°C)
Note(s):
- Installed bushings should be approximately 0.012" (0.3mm) below subplate surface.
- To alleviate the possibility of binding the shank in the bore, the maximum interference fit between bore and bushing O.D. should not exceed 0.0005" (0.013mm).
